<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: SNMP Dell EqualLogic Logical Disk Sensor

The SNMP Dell EqualLogic Logical Disk sensor monitors a volume of a Dell EqualLogic storage system via the Simple Network Management Protocol (SNMP).

SNMP Dell EqualLogic Logical Disk Sensor

For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

Dutch: SNMP Dell EqualLogic Logische Schijf
French: Dell EqualLogic disque logique (SNMP)
German: SNMP Dell EqualLogic Logischer Datenträger
Japanese: SNMP Dell EqualLogic 論理ディスク
Portuguese: Disco lógico Dell EqualLogic (SNMP)
Russian: Логический диск SNMP Dell EqualLogic
Simplified Chinese: SNMP Dell EqualLogic 逻辑磁盘
Spanish: Disco lógico Dell EqualLogic (SNMP)

Remarks

Consider the following remarks and requirements for this sensor:

Remark	Description
IPv6	This sensor supports IPv6.
Performance impact	This sensor has a low performance impact.
Lookups	This sensor uses lookups to determine the status values of one or more channels.

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

dell
dellequallogic
snmpdell

For more information about basic sensor settings, see section Sensor Settings.

Dell EqualLogic Specific

Setting	Description
Volumes	The volume that this sensor monitors.
Member ID	The member ID of the volume that this sensor monitors.
Volume ID	The ID of the volume that this sensor monitors.
Volume Description	The description of the volume that this sensor monitors.

Sensor Display

Setting	Description
Primary Channel	Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type	Define how this sensor shows different channels: Show channels independently (default): Show a graph for each channel. Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit	This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.

For more information, see section Inheritance of Settings.

Channel List

Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel	Description
Availability	The availability status Up status: Available Down status: Missing Members This channel is the primary channel by default.
Average Read Latency	The average read latency
Average Write Latency	The average write latency
Connections	The number of connections
Data Read	The data read speed
Data Written	The data write speed
Downtime	In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status
Operations Status	The operations status Up status: Available Warning status: Available But No New Connections Down status: Not Available, Not Available Due To, Not Available Due To Internal Error, Not Available Due To Lost Cached Blocks, Not Available Due To Members Offline, Not Available Due To Missing Pages, Not Available Due To No Space For Auto Grow, Not Available Due To Snap Reserve Met, Not Available Due To Thin Max Growth Met,
Read Ops	The number of disk read operations
Write Ops	The number of disk write operations

KNOWLEDGE BASE

What security features does PRTG include?

https://kb.paessler.com/en/topic/61108

My SNMP sensors don’t work. What can I do?

https://kb.paessler.com/en/topic/46863